11 of 12 exact pairings need rack-maker confirmation. The table identifies the upper bar for each kit. A kit’s load rating applies to the part named in its specifications.
UnconfirmedBells shows its strap over a rack pull-up bar. Mikolo gives no rating for that strap on the QJ01 bar.Open this pair in the finder
Rack family documented · exact kit unconfirmedThe 280 lb kit lists pull-up bars. The QJ sheet names a pulley add-on without a kit number. Mikolo’s current two-block, 330 lb kit is a different model.Open this pair in the finder
UnconfirmedPRx supplies a pull-up bar strap. Mikolo’s QJ documentation does not identify the Elite High for the QJ01 quick-attach bar.Open this pair in the finder
UnconfirmedSERTT lists pull-up bars as upper anchors. The QJ sheet does not identify either SERTT block or a lower attachment point.Open this pair in the finder
UnconfirmedThe Bells kit uses a strap. PRx names its own Elite for this rack and gives no Bells-specific anchor rating.Open this pair in the finder
UnconfirmedPRx documents the bar for its own Elite High. It gives no mounting approval for the Mikolo 280 lb kit.Open this pair in the finder
Confirmed by rack makerPRx specifies looping the supplied strap over this bar. The Amazon.com listing includes the high pulley only.Open this pair in the finder
UnconfirmedPRx identifies its own high strap and low mounting hardware. Neither attachment is documented for the black SERTT kit.Open this pair in the finder
UnconfirmedBells describes a high rack bar. Titan does not list the Bells strap for the 82 × 21 in folding model.Open this pair in the finder
UnconfirmedMikolo lists pull-up bars. Titan gives no mounting approval for its strap on the pinned T-3 folding bar.Open this pair in the finder
UnconfirmedPRx supplies a pull-up bar strap. Titan’s 401226 manual does not specify an Elite High strap position or load on its pinned bar.Open this pair in the finder
UnconfirmedTitan documents neither a SERTT strap on part 2 nor a lower SERTT block on this folding rack.Open this pair in the finder
Upper and lower mounting points in the rack maker’s instructions
85.8 in / 217.932 cm frame.Pull-up bar separately listed at 89 in / 226.06 cm. Measure the installed bar.Installation ceiling minimum unpublished.
Upper point · Quick-attach pull-up bar between the uprights. Mikolo lists a cable pulley add-on for its QJ family. That sheet describes 14-gauge steel. The black QJ01 listing specifies 13-gauge uprights and gives no suspended load for its bar.
Low route · Mikolo identifies a landmine for barbell rows. The QJ01 documents reviewed give no lower point for a cable pulley.
90 in / 228.6 cm frame.Minimum ceiling 91 in / 231.14 cm.
Upper point · Adjustable pull-up bar between the uprights. PRx explicitly hangs its own Elite High Pulley by a strap over the Fold-In ONE pull-up bar. Its compatibility FAQ leaves other brands’ accessories unverified.
Low route · The Elite Low mounts in a lower upright hole (5/8 in or larger). PRx sells the rack lock separately to keep the upright from lifting. Both Amazon Shop Direct links below take you to PRx for checkout. PRx describes the lock as optional for general pulley use. For cable belt squats, it specifies locking the upright that carries the low pulley. PRx documents no lower strap point for the third-party kits here.
82.375 in / 209.2325 cm frame.Installation ceiling minimum unpublished.
Upper point · 1.25 in pull-up bar, part 2 in the rack manual. Step 2 of the 401226 manual pins this bar to the uprights with part 3. Titan identifies it for pull-ups. The manual gives no pulley strap position or suspended-load rating on it.
Low route · Titan specifically excludes its bolt-on TRIPLLY-LOWPLLY (SKU 400068) from folding racks. Its accessory guidance identifies no lower mount for the kits compared here.
Bells of Steel Cable Pulley · Bells uses a second separately purchased kit for its low-row route. A lower anchor for that route still needs rack-maker confirmation.
Mikolo LAT and Lift Pulley System · This one-block kit shows pull-down and lift configurations. Its instructions give no fixed lower mounting point on these racks.
PRx Performance Elite High Pulley · Low rows on the Fold-In ONE use the separate Elite Low Pulley and its cable. We could not verify a US Amazon listing for the low attachment on November 21, 2026.
SERTT Weight Cable Pulley System · Both blocks are included. A route with a fixed lower block also needs a documented lower attachment point.
Choose the plates individually. Allow room to secure them on the pin or strap and to clear the wall throughout the lift. Use the lowest rating among the kit, its attachments and the approved rack anchor.
How much height does the pulley need?
The kit makers publish cable lengths. Ceiling height determines whether the rack can stand in the room. To find the height needed for a pull, measure the installed bar, the hardware below it and how far the loaded plates need to rise.
For example, with the anchor 76 in above the floor, 8 in of hardware below it and the top of the loaded pin starting 20 in above the floor, a 30 in plate rise leaves 18 in overhead. Use your own rack measurements to check pulley height and plate travel.