HOW-TO
How to measure a weight bench for under-bed storage
Measure the bed opening, the space behind it, and the route your folded bench will take.
Measure the opening from the floor to the bottom of the lowest rail. Check the gap with any rug in place and use the smallest measurement along the route.
Measure three ways
- Height: Measure under the side rail, then check for center beams, fasteners, and floor transitions inside the opening.
- Width: Measure the open gap between legs or braces. Try the side you plan to approach from.
- Depth: Measure from that opening to the first obstruction, including the center support or anything already stored there.
Mark the size of the folded bench on cardboard or with painter’s tape. Use the outline to check whether you can turn the bench into position, hold it where the manual directs, and reach it again without moving other furniture. Leave the clearance you need for your hands and handling path.
Order by the folded envelope
A 9-inch-high opening gives a bench listed at 8.6 inches folded just 0.4 inches of total vertical clearance before any allowance. Use the Flybird WB5 manufacturer page to confirm the exact model and folded envelope. The bench dimensions comparison lists other folded shapes for tight spaces.